MTP/MPO Cable Solutions Common Problem

1, MTP/MPO Cable Solutions the phenomenon of scorch

(1) MTP/MPO Cable Solutions the temperature reflects the ultra-high, or control the temperature of the instrument failure, resulting in plastic ultra-high temperature and scorch.

(2) MTP/MPO Cable Solutions the nose of the mouth of a large mouth smoke, a strong stimulating smell, in addition to crackling.

(3) MTP/MPO Cable Solutions plastic surface appears granular carrot.

(4) MTP/MPO Cable Solutions There are continuous pores in the joint.

2, MTP/MPO Cable Solutions the cause of scorch

(1) high temperature control caused by plastic scorch.

(2) screw long-term use without cleaning, burnt material accumulation, with the plastic extrusion.

(3) heating time is too long, plastic products long-term heating, so that the aging of the plastic and scorch.

(4) parking time is too long, no cleaning head and screw, resulting in plastic decomposition scorch.

(5) repeated mold or color change, resulting in plastic decomposition scorch.

(6) head gland is not pressed, the plastic aging in the inside decomposition.

(7) control the temperature of the instrument failure, resulting in ultra-high temperature after the scorch.

3, MTP/MPO Cable Solutions the exclusion of scorch method

(1) regular check whether the heating system is normal.

(2) regularly clean the screw or nose, to thoroughly clean.

(3) according to the requirements of heating process, heating time should not be too long, if the heating system problems in a timely manner to find the relevant personnel to solve.

(4) change the mold or color change in a timely manner, clean, to prevent variegated or save plastic scorch.

(5) to adjust the mold after the mold cover to tighten the lid to prevent the glue.

(6) found that scorch should immediately clean the head and screw.