GJS-D002 Fiber Optical Vertical Joint Splice Closure Box

Product Details

Scope of application 

This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
The scope of application is: aerial, underground, pipeline, hand-holes. The ambient temperature ranges from -40℃ to 65℃.
Basic structure and configuration
2.1 Dimension and capacity

Outside dimension (Height x Diameter)

430mm×190mm

Weight (excluding outside box)

2500g—3100g

Number of inlet/outlet ports

4 pieces

Diameter of fiber cable

Φ8mm~Φ16 mm

Capacity of FOSC

Bunchy: 12-96 (cores), Ribbon: up to 288 (cores)

2.2 Main components

No.

Name of components

Quantity

Usage

Remarks

1

FOSC cover

1 piece

Protecting fiber cable splices in whole

Height x Diameter
     355mm x 150mm

2

Fiber optic splice tray (FOST)

Max. 6 trays (bunchy)
     Max. 4 trays (ribbon)

Fixing heat shrinkable protective sleeve and holding fibers

Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces)

3

Fiber holding tray

1 pcs

Holding fibers with protective coat


4

Base

1set

Fixing internal and external structure


5

Plastic hoop

1 set

Fixing between FOSC cover and base


6

Seal fitting

1 pc

Sealing between FOSC cover and base


7

Seal rings for inlet/outlet ports

4pcs

For the inner seal of inlet/outlet ports; the diameter is 12.5mm,can shrink to 7mm


8

Pressure testing valve

1 set

After inject air, it is used for  pressure testing and sealing testing

Configuration as per requirement

9

Earthing deriving device

1 set

Deriving metal parts of fiber cables in FOSC for earthing connection

Configuration as per requirement

2.3 Main accessories and special tools

No.

Name of accessories

Quantity

Usage

Remarks

1

Heat shrinkable protective sleeve


Protecting fiber splices

Configuration as per capacity

2

Nylon tie


Fixing fiber with protective coat

Configuration as per capacity

3

Earthing wire

1 piece

Putting through between earthing devices

To put through as per actual requirement

4

Abrasive cloth

1 piece

Scratching fiber cables


5

Labeling paper

1 piece

Labeling fibers


6

Special wrench

2 pieces

Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube


7

Measuring paper

1 piece

To measure perimeter, of which its diameter is enlarged with seal tape

To measure perimeter with the corresponding measuring paper

8

Seal tape

1 ring

Enlarging diameter of fiber  cable which fits in with gasket ring.

Configuration as per specification

9

Insulation tape

1 ring

Enlarging diameter of fiber  cable for easy fixing


10

Metal hoop

1 set

For wall mounting and pole hugging


11

Buffer tube

decided by customers

Hitched to fibers and fixed with FOST, managing buffer.

Configuration as per requirement

12

Desiccant

1 bag

Put into FOSC before sealing for desiccating air


Spring Optical Communication is one of the largest and best gjs-d002 fiber optical vertical joint splice closure box manufacturers and suppliers with rich experience. Welcome to buy our high quality products or wholesale our customized gjs-d002 fiber optical vertical joint splice closure box in stock with our factory. Also, free sample is also available if necessary.

Feedback
[[ImgSrc-PhoneChat]]