FOSC GJS 03M 96core Small Dome Optical Fiber Splice Closure

Product Details

GJS03-M Splice closure


The strong housing provide fire resistant, anti-aging, anti-UV and waterproof, quake-proof while protecting splices during pulling, torsion and impacting. Highly reliable sealing system. Heat-shrink on the ports. Can be used in aerial, underground, direct buried installation environments. Available for wall, stand or pole mounting.



Tray capacity

Total Capacity



(max point)

Cable Entry and available cable dia.

Raw material





96 c


1 oval port for 2pcs 8~23mm cable.

4 round ports for 6~16mm cable

Dome & base :

Modified P.P

Tray: ABS







1. Excessive fibers can be stored in storage baskets. Easy in fiber management.
2. Fabricated by mixing the imported material and other chemical assistant agent (ageing resistance & ultraviolet radiation resistance), increase of service life
3. Base-to-dome seals on FOSC are mechanical and heat-shrinkable on ports for ease of installation and reentry. No other sealing adhesive tape is needed
4. Base and dome sealed with clamp and O-ring system
5. The splice trays are hinged for access to any splice without disturbing others trays
6. The inner parts and fixing parts are made of 304 stainless steel
7. FOSC can order with a earthling device protect it from damage by lightning


Technical Parameter:
1. Working Temperature: -40 degrees centigrade~+70 degrees centigrade
2. Atmospheric Pressure: 70~150Kpa
3. Axial Tension: >2000N/1min
4. Stretching Resistance: 2500N/10 square centimetre(1min)
5. Insulation resistance: >2*104MΩ
6. Voltage Strength: 15KV/1min, no arcover or breakdown
7. Pressure in the water: 50m/72hours
8. Splice tray with optical taking-in radius ≥ 37.5mm. Low optical loss.



Spring Optical Communication is one of the largest and best fosc gjs 03m 96core small dome optical fiber splice closure manufacturers and suppliers with rich experience. Welcome to buy our high quality products or wholesale our customized fosc gjs 03m 96core small dome optical fiber splice closure in stock with our factory. Also, free sample is also available if necessary.