SP-7000 Fiber Optic Surface Microscope/fiber End Face Detector
SP-7000 Fiber Optic surface microscope/fiber end face detector
SP7000 series can enlarge fiber end by 200x,400x or 800x magnification. Baseline is according with end face diameter measured on 8inch screen.
Then enlarged picture of fiber end face is showed on display through video signal. Finally fiber end defects can be easily found at a glance on the display.
SP7000 series start work when power on. No cables between display and microscope makes it easy to manipulate, fast to work,and most of all greatly enhances work efficiency.
SP7000 series can quickly check blemish, scratch and chipping etc. defects on fiber jumper and fiber ferrule. Operators just need to visually inspect fiber end on LCD screen instead of directly view on it. Therefore no harm on human eyes. As well known, harm is made by laser in fiber when operators directly view fiber end.
Technical parameters and specifications
X/Y axis adjustable
Image input/output format
Image output port
Image input port
+10℃ ~ +50℃
0℃ ~ +55℃
8"TFT 800*600 PIX
Remark: “Y” indicates function enabled; “-” indicates function disabled.
Spring Optical Communication is one of the largest and best sp-7000 fiber optic surface microscope/fiber end face detector manufacturers and suppliers with rich experience. Welcome to buy our high quality products or wholesale our customized sp-7000 fiber optic surface microscope/fiber end face detector in stock with our factory. Also, free sample is also available if necessary.